50-65HRC Ceramic Blasting Media B100 B120 B170 B205 B400 B505 for
Metal & Plastic Surface Finish
1. Product Description of Ceramic Beads
Ceramic Beads selects the high quality zircon sand as main raw
materials,then fused in electric furnace
under high temperature over 2000℃,then made into beads in different
size,it is one popular blasting media,
which is mainly used in surface finish for metal,plastic and rubber
parts.
2. Main Technical Data of Ceramic Beads
| Commodity | Ceramic Blasting Media |
| Chemical Index | ZrO2 60-66%
SiO2 25-30%
Al2O3 7-13% |
|
|
| Physical Index | Vickers Hardness ≥700 HV
Bulk Density≥2.3g/cm3
True Gravity: 3.85g/cm3
Process: Melting |
|
|
|
| Particle Size | B20: 0.600-0.850mm | B120: 0.063-0.125mm |
| B30: 0.425-0.600mm | B150: 0.053-0.106mm |
| B40: 0.250-0.425mm | B170: 0.045-0.090mm |
| B60: 0.150-0.300mm | B205: 0.000-0.063mm |
| B80: 0.125-0.212mm | B400: 0.030-0.063mm |
| B100: 0.106-0.180mm | B505: 0.000-0.030mm |
| Remark: Special specification can be customized |
3. Main Applications
Surface finish for Metal Parts made by aluminum,aluminum
alloy,magnesium alloy,titanium alloy,stainless
stell etc.
Surface finish for plastic parts: the in-built parts ,frame of 3C
products etc.
4. Why ceramic bead is widely used for surface finish of aluminum
parts?
The blasting principle of ceramic bead is to make use of the impact
of high-speed sand flow to clean and
roughen the metal surface.
When the surface of aluminum parts is treated in that way,it will
obtain a certain degree of cleanliness and
different roughness in the surface, improve its mechanical
properties ,finally improve its anti-fatigue and
increase the adhension,it will extend the durability of the coating
film, and is also conducive to the leveling
and decoration of the coating.
In addition,there is little dust generation in the whole blasting
process,which will provide one clean and
bright blasting condition,it is one clean blasting media,the worker
will escape form the hidden danger of
silicosis.
At last,ceramic beads has low breakdown rate,its service life can
be prolonged 20-30 times compared
the one of glass beads,it has more competitive price/performance
ratio seen from the long-term blasting
process.
So ceramic beads is widely used for surface finish of aluminum
parts.
5. Questions & Answers
Q: Are you manufacturer of ceramic beads? Where your plant locates
in?
A: Yes,we are direct manufacturer,our plant locates in
Shanxi,China.
Q: Is free sample available?
A: Yes,free sample no more than 500g is available.
Q: What is your MOQ?
A: Generally speaking, MOQ is 12.5kg,but for special
requirement,smaller quantity is also acceptable.
Q:How about the payment terms?
A: L/C,T/T,paypal,money gram is also accepatable.
Q:How long the cargo will be loaded into the vessel?
A:For order quantity no more than 2mts,Cargo will be shipped to the vessel within 10 days after payment
received.
Q:How about the Quality Guarantee?
A: All the material can be tracable from the raw material to the
final products, products will be sampled
before delivery even for free sample in small quantity.
