TZP 95 Yttrium Stabilized Zirconia Beads Zirconium Oxide Balls
0.6-0.8mm 0.9-1.1mm 1.0-1.2mm
1. Product Description of 95 Zirconia Beads
Zirconia beads selects the high quality micrometer and
sub-nanometer zirconia powder and yttrium
oxide as the main material,then made by process of pressure rolling
forming and high-temperature
sintering.
Its crystal shape is tetragonal zirconium oxide,also called "TZP"
zirconium bead, which is mainly used
for ultra-fine grinding and dispersion of materials requiring "zero
pollution" and high viscosity and hardness.
2. Main Technical Data of 95 Zirconia Beads
| Commodity | Typical Chemical Index | Main Physical Index |
95 Zirconia Beads Grinding Media | ZrO2 ≥95% | True Gravity ≥6.0g/cm3 |
| Y2O3 ≥4.5% | Bulk Density ≥3.7g/cm3 |
| Others ≤0.5% | Vicker Hardness ≥1100 HV |
| sintering process | compressive strength ≥2.0KN Φ2mm |
| Sphericity≥95% |
| Zirconia Beads Specification |
| Φ0.1-0.2mm | Φ0.2-0.3mm | Φ0.3-0.4mm | Φ0.4-0.6mm |
| Φ0.6-0.8mm | Φ0.8-1.0mm | Φ1.0-1.2mm | Φ1.2-1.4mm |
| Φ1.4-1.6mm | Φ1.6-1.8mm | Φ1.8-2.0mm | Φ2.0-2.2mm |
| Φ2.2-2.4mm | Φ2.4-2.6mm | Φ2.6-2.8mm | Φ2.8-3.0mm |
| Φ4mm | Φ5mm | Φ6mm | Φ7mm |
| Φ8mm | Φ9mm | Φ10mm | Φ12mm |
| Φ15mm | Φ17mm | Φ20mm | Φ25mm |
| Φ30mm | Φ40mm | Φ45mm | Φ50mm |
| Special Specification can be customized |
3. Main Application of 95 Zirconia Beads Grinding Media
Widely used for the ultra-fine grinding and dispersion of ink,
paint, coating, non mineral, dye,
pigment, pesticide, titanium dioxide, electronic ceramics, medicine
and other industries;
4. Why 95 Zirconia Beads Grinding Media is one high efficiency
grinding media?
The specific gravity of 95 zirconia bead is 6.0-6.1g/cm3, so the
impact energy is strong, which greatly
improves the grinding efficiency.
During the grinding process, it can obtain higher outlet speed and
flow rate, reduce the number of cycles,
shorten the grinding time, improve the grinding efficiency and
achieve ideal grinding effect.
5. Precautions for using 95 Yttrium Stabilized Zirconia Beads
Select the appropriate zirconia beads
Select the appropriate zirconia beads according to the type and
target particle size of the material to be ground.
Pregrinding
When using 95 zirconia beads for the first time, pre-ground in the
slurry with a certain viscosity for 30 minutes
is required. If the slurry concentration is low, the rotation speed
should be reduced, and then the time should not
be exceeded 15 minutes.
Cleaning
When the treated material is paint, it is recommended to clean the
zirconia beads with resin. If using the solvent,
then the rotating speed should be reduced, and the time should not
be exceeded 10 minutes. Also suggest
to clean the zirconia beads intermittently, that means, turn off
and start again after a period of time
Adding new grinding beads
During the grinding process, zirconia beads will collide with each
other,and occur a certain abrasion, so some
new zirconia beads need to be added as a supplement after some
time.
Please screen out the broken zirconia beads before supplement, and
add the same weight of zirconia beads with
the broken one.
Other Moments to add the new beads
a certain new zirconia beads need to be added If the grinding time
needs to be extended or the grinding fineness
cannot achieve the desired effect without changing the grinding
fineness requirements.
6. Why Choose us?
Professional Manufacturer,Multiple Authentication
Certificated by ISO9001 ISO14001,SGS,ROHS
Guaranteed Product Quality
All products is traceable from the very beginning of raw material
to the final products,each shipment
will be tested even for one some quantity sample,providing good
quality & stable performance;
High price/performance Ratio
Our plant is located in mountain area,with competitive
environmental costs and staff salaries,finally
providing more competitive price;
Flexible Cooperation models
We will provide flexible cooperation model and payment terms no
matter you are the final users or distributor etc.
