Ceramic Beads B30 applicable for pipe cleaning in sandblasting
machine
DESCRIPTION OF CERAMIC BEADS
The ceramic beads is made of zircon sand imported from Australia as
the main material, adopts advanced technology formula, and is
smelted and blown into fine beads after smelting in high
temperature above 2000 degrees. With high hardness and surface
smoothness, it can be recycled and reused repeatedly, reducing the
number of refills. Wide range of particle size from B20 to B505,
strong optionality, and can be matched with various types of
sandblasting machines.
SPECIFICATION OF CERAMIC BEADS
| Chemical Index | ZrO2 | SiO2 | Al2O3 |
| 60-65% | 25-30% | 7-13% |
| Typical Value | 62.20% | 26.10% | 9.05% |
| Bulk Density | 2.3g/cm3 |
| Specific Density | 3.85g/cm3 |
| Vickers Hardness | 700HV |
Sizes
| B20 | B30 | B40 | B60 |
| 600-850µm | 425-600µm | 0250-425µm | 125-250µm |
| B80 | B120 | B170 | B205 |
| 180-250µm | 63-125µm | 45-90µm | 0-63µm |
Special sizes available against clients’ requirement.
FEATURES OF CERAMIC BEADS
Our ceramic beads are first class in China and have the following
characteristics:
1) Imported raw materials, high quality ceramic beads
The use of Australia imported high-quality raw materials to produce
ceramic beads, high hardness, good elasticity, longer service life.
2) Independent research and development
Product testing equipment is complete, with a complete independent
intellectual property rights, and in Beijing and Shijiazhuang has
an independent laboratory and university cooperation laboratory.
More importantly, we have many years of continuous improvement of
the R & D team.
3. Better cleanliness and more concentrated size
We have our own particle size distribution standards, more
concentrated particles, can be screened according to customer
requirements.
4. High hardness, long life, good elasticity
Ceramic beads have high hardness and small deformation.
The ceramic beads hardness up to 700HV -800HV ensures that the
ceramic beads can be used for shot peening of high strength and
high strength structural parts. Small deformation ensures that the
shape of the projectile does not change in the process of impact.
The sphericity of the ceramic beads improves the stability of the
quality of the shot peening parts.
APPLICATION OF CERAMIC BEADS
It is often used for sandblasting cleaning of castings and forging
parts, inner and outer walls of pipes, metal parts deblur.and molds
cleaning.
At the same time, it can also be used for sandblasting cleaning for
below cases: Cleaning rust layer on metal, residual salt and oxide
layer on the surface of heat-treated parts, oxide layer on the
surface of rolling parts, oxide layer on the surface of forging
parts, oxide layer on the surface of welding parts, molding sand
and oxide layer on the surface of castings, machine tool The
residual dirt and tiny burrs on the surface of the added parts, the
surface of the old parts, etc. are treated to remove the surface
adhesion layer and reveal the true color of the substrate.
APPLICABLE EQUIPMENT OF CERAMIC BEADS
In sandblasting
Manual sandblasting machine
Automatic sandblasting machine
Open type sandblasting machine
Sandblasting machine room
CONTACT US
Besides ceramic beads, we also have other blasting media available
Glass beads, steel shot, aluminum oxide grits etc.
