Ceramic shot peening beads Z150-Z850 for automotive and aerospace
industries
Ceramic bead is also called Zirconium silicate beads, produced by
melting method. It is of high toughness and density, not easy to
deform its shape, resulting in a consistent surface finish, and
less prone to stains or blemishes during use.
Our ceramic shot peening services meet the standards in the shot
peening industry, including the SAE International standards. We are
registered in ISO9001 and ISO 14001,
We serve many industries, and specialize in the automotive and
aerospace industries.
| Chemical Index | ZrO2 | SiO2 | Al2O3 |
| 60-65% | 25-30% | 7-13% |
| Typical Value | 62.20% | 26.10% | 9.05% |
| Bulk Density | 2.3g/cm3 |
| Specific Density | 3.85g/cm3 |
| Vickers Hardness | 700HV |
| Bead Size (mm) | Bead Size (mm) |
| Z150 | 0.15-0.21 | Z425 | 0.425-0.6 |
| Z210 | 0.21-0.30 | Z600 | 0.6-0.85 |
| Z300 | 0.30-0.425 | Z850 | 0.85-1.18 |
Special sizes available against clients’ requirement.
1. High Density, not only applicable for shot peening of
low-strength structural parts, but also can shot peening for
high-strength structural parts.
2. Smooth surface, high sphericity, and good elasticity, can
protect the equipment, whether it is dry or wet spray.
3. Can strengthen the surface of the metal surface, improve the
service life of the workpiece, improve the wear resistance, and
improve the texture of the workpiece.
4. Variety of grade, or size, of the ceramic shot to provide the
required surface finish and strength compression.
5. Applicable to finish many metals, including aluminum, steel,
steel forgings and machine parts.
- It is ideally suited for shot peening, widely used processes for
improving the wear properties of metal surfaces, usually for gears
and other complex shapes. Ceramic shot peening creates dimples on
the surface of the gear. The dimples retain beneficial oils and
eliminate geartooth pitting, increasing the strength and fatigue
life of the gear.
Our Service
Free Samples -1kgs
Different blasting workpieces, Different requirements for ceramic
beads.
Our factory can provide consult solution, suggest the ceramic beads
sizes according to the workpiece you handle and provide 1kgs
ceramic beads samples for free.
OEM customize same ceramic beads with your samples or requirements.
Our factory has our own test lab., with high precision chemical and
particle size detection instruments. You can send ceramic beads
samples, then we will test and analysis it and customize same
ceramic beads with your samples or according to your customer
requirements.
Quality Guarantee
Guarantee our ceramic beads has no quality problems, and in case
any problems are found,
We accept return and/or exchange.
Caroline Cui
Address: Ximazhuang, Liuzhai Town, Xinmi City, Henan, China
