PA plastic media red color size PA40 for Plastic Sandblasting
Surface Treatment
Our PA plastic media is produced from imported raw materials and by
our patented technology by our independent research pf high-speed
precision granulation. With uniform particles, wear-resistant and
long-life antistatic. All products have passed SGS tested and
ISO9001 certification.
PA plastic media mainly used for plastic products sandblasting
surface treatment to remove spilled glue and deburring.
| Size | Diameter*Length mm | Color |
| PA10 | 0.10*0.10 | White |
| PA15 | 0.15*0.15 | White |
| PA20 | 0.20*0.20 | White |
| PA30 | 0.30*0.30 | White |
| PA40 | 0.40*0.40 | White |
| PA50 | 0.50*0.50 | White |
| PA60 | 0.60*0.60 | White |
| PA80 | 0.80*0.80 | White |
| PA100 | 0.80*0.80 | White |
| PA120 | 1.00*1.00 | White |
Remark: Dimension accuracy ±0.05mm Special specification and color can be customized |
| Shape: | Cylindrical |
| Color: | Translucent milky white or Red |
| Material: | Nylon 6 |
| Hardness: | Rockwell hardness HRC 120 |
| Specific gravity: | 1.14 g/cm3 |
| Tensile force: | 750 kg / cm2 |
| Bending stress: | 1000 kg / cm2 |
| Water absorption rate 23 ℃: | 1.8% |
| Molding shrinkage: | 1.2—1.5% |
| Melting point: | 220 ℃ |
1. PA plastic media is artificial abrasive, with cylindrical and hexahedral shapes;
2. PA plastic media has a certain degree of toughness, non-cutting,
and will not cause damage to the product to be processed during
use.
The material is soft and has a long service life.
3. PA plastic media is mainly used for sandblasting and shot
blasting equipment to clean and remove burrs and burrs on the
surface of the workpiece.
Widely used in sandblasting surface treatment:
1. Remove burrs of precision thermoplastic plastic parts such as
mobile phone cases, connectors or thermosetting plastic parts such
as transformer bakelite skeleton Bobbin;
2. Integrated circuit IC epoxy resin packaging, printed circuit
board PCB drilling, SMD resin packaging of electronic components,
such as spillage, flashing or burrs;
3. Homogenize plastic parts to eliminate bad marks and improve
product quality;
4.Decontamination and paint removal of precision parts, used for
aircraft, yacht, automobile and other vehicle maintenance.
Our PA plastic media has added appropriate amount of antistatic liquid in the raw materials
formula, so it will prevent to generate static electricity in the process of using
and recycling. It will bring you good using experience without any troubles.
