Polyamide plastic media size PA30 blasting for plastic transformer
skeleton deburring
The main raw material of Polyamide plastic media is polyamide fiber, translucent milky white or red crystalline
thermoplastic polymer particles.
Polyamide plastic media is made of high-molecular polymer materials, which has unique
impact resistance, better durability, precision-level manufacturing
process, and good accuracy, which can reduce the defect rate of
processed products. It is environmentally friendly, low dust,
suitable for repeated cycles and long-term use, and can reduce the
user's production cost.
| Size | Diameter*Length mm | Color |
| PA10 | 0.10*0.10 | White |
| PA15 | 0.15*0.15 | White |
| PA20 | 0.20*0.20 | White |
| PA30 | 0.30*0.30 | White |
| PA40 | 0.40*0.40 | White |
| PA50 | 0.50*0.50 | White |
| PA60 | 0.60*0.60 | White |
| PA80 | 0.80*0.80 | White |
| PA100 | 0.80*0.80 | White |
| PA120 | 1.00*1.00 | White |
Remark: Dimension accuracy ±0.05mm Special specification and color can be customized |
1. Charge prevention effect, dust and nylon sand will not easily
adhere to the surface of the finished product.
2. Nylon sand grains are neatly shaped, and the cut surface is
smooth and has a good deburring effect.
3. Solid and long life, long-term use will not be deformed or
hairy, and the corner burr removal performance is good.
4. It has a certain degree of toughness, no machinability, and will
not cause damage to the product to be processed during use.
Polyamide plastic media is mainly used for sandblasting and shot blasting equipment. In
cleaning, it can remove burrs and spurs on the surface of the
workpiece without causing damage to the surface of the workpiece.
Examples of uses:
1. Removal of spilled glue in the electronics industry: surface
pretreatment of circuit boards and removal of spilled glue of
electronic parts.
2. Clean the epoxy optical detector: it will not make the surface
opaque.
3. Composite materials: paint and coating can be removed from glass
fiber, carbon fiber and resin workpieces.
4. Mold cleaning: rubber, plastic, glass and die-casting molds can
be cleaned without damaging the dimensional accuracy of the mold.
5. Aircraft paint removal: remove most of the aircraft paint, but
retain the electroplating layer.
6. Deburring: Remove small and slight burrs without damaging the
surface of the workpiece.
Red color of polyamide plastic media also available. Please feel
free to contact us for detailed quotation.
